How to Download and Install Software for Abbree AR-889G Radio
Introduction
If you are looking for a powerful, versatile, and user-friendly handheld radio, you might want to check out the Abbree AR-889G radio. This radio is a tri-band transceiver that covers VHF, UHF, and 350 MHz bands. It has a built-in GPS function, a cross-band repeater function, a dual display, a night mode, a backlight mode, a duplex working mode, a dual receive mode, 999 memory channels, CTSS/DCS, VOX, DTMF, SOS, priority scan, remote emergency alarm, wide/narrow bandwidth selection, operating voice prompts in English and Chinese, single tone pulse frequency, reverse frequency, stopwatch function, and many more features.
abbree ar-889g software download
However, to make full use of these features and customize your radio according to your preferences, you need to download and install software for your Abbree AR-889G radio. The software allows you to program your radio easily from your computer. You can edit the memory channels, menu settings, and other options with a few clicks. You can also save your settings in a file or read them from your radio.
In this article, we will show you how to download and install software for your Abbree AR-889G radio. We will also provide some useful information about the software and the radio. By following these steps, you will be able to enjoy your radio more and communicate better with others.
Steps to Download and Install Software for Abbree AR-889G Radio
Step 1: Visit the official website of Abbree Electronic Co.,Ltd.
The first step is to visit the official website of Abbree Electronic Co.,Ltd., which is [the manufacturer](^10^) of Abbree AR-889G radio. On their website, you can find various products, news, contact information, support, and download options.
To download the software for your Abbree AR-889G radio, you need to go to their [download page](^1^). On this page, you can see different categories of products that have downloadable files. You need to click on "ABBREE" category and then scroll down until you see the file name "AR-889G software.zip". This is the software file that you need to download for your radio. You can click on the file name and then click on the "Download" button to start downloading the software file. The file size is about 2.5 MB and it should not take long to download.
abbree ar-889g programming software
abbree ar-889g firmware update
abbree ar-889g software windows 10
abbree ar-889g driver download
abbree ar-889g manual pdf
abbree ar-889g software mac
abbree ar-889g cps download
abbree ar-889g software linux
abbree ar-889g software free download
abbree ar-889g software rt systems
abbree ar-889g software installation
abbree ar-889g software troubleshooting
abbree ar-889g software review
abbree ar-889g software tutorial
abbree ar-889g software features
abbree ar-889g software requirements
abbree ar-889g software compatibility
abbree ar-889g software update 2023
abbree ar-889g software alternative
abbree ar-889g software license key
abbree ar-889g software support
abbree ar-889g software forum
abbree ar-889g software tips and tricks
abbree ar-889g software guide
abbree ar-889g software version history
Once you have downloaded the software file, you need to save it on your computer. You can choose any location that is convenient for you, such as your desktop or your documents folder. You can also rename the file if you want, but make sure to keep the ".zip" extension.
Step 2: Connect your radio to your computer using a USB cable
The next step is to connect your radio to your computer using a USB cable. You need to use the USB cable that came with your radio or a compatible one. The USB cable has two ends: one end is a standard USB plug that goes into your computer's USB port, and the other end is a mini USB plug that goes into your radio's USB port.
To connect your radio to your computer, you need to turn on your radio first and then set it to programming mode. To do this, you need to press and hold the "MENU" button on your radio for about 3 seconds until you see "PC LINK" on the screen. This means that your radio is ready to be programmed by the software.
Then, you need to plug the mini USB end of the cable into your radio's USB port, which is located on the side of your radio. You should hear a beep sound from your radio when you do this. Next, you need to plug the standard USB end of the cable into your computer's USB port. You should see a notification on your computer that a new device has been connected.
If this is the first time that you connect your radio to your computer, you may need to install the USB driver for your radio. The USB driver is a small program that allows your computer to recognize and communicate with your radio. The USB driver is included in the software file that you downloaded in step 1. To install the USB driver, you need to unzip the software file and then run the file named "USB Driver.exe". Follow the instructions on the screen to complete the installation.
After installing the USB driver, you need to check the COM port number of your radio. The COM port number is a number that identifies which USB port your radio is connected to. You need to know this number because you will use it in step 3 when you run the software. To check the COM port number of your radio, you can follow these steps:
- On your computer, open the "Device Manager" window. You can do this by clicking on the "Start" button and then typing "Device Manager" in the search box. Then, click on the "Device Manager" option that appears. - On the "Device Manager" window, look for a category named "Ports (COM & LPT)". Click on the arrow next to it to expand it. - Under this category, look for a device named "USB-SERIAL CH340 (COMx)", where x is a number. This device represents your radio. The number next to it is the COM port number of your radio. For example, if you see "USB-SERIAL CH340 (COM3)", then your COM port number is 3. - Write down or remember this COM port number for later use. Step 3: Run the software and program your radio
The final step is to run the software and program your radio. To do this, you need to unzip the software file that you downloaded in step 1 and then run the file named "AR-889G.exe". This will open the software window on your computer.
On the software window, you need to select the correct COM port number that matches with your radio. You can do this by clicking on the "Port" menu and then choosing the COM port number that you checked in step 2. For example, if your COM port number is 3, then you need to click on "Port" and then click on "COM3".
After selecting the COM port number, you need to read the current settings from your radio or create a new file with default settings. You can do this by clicking on one of these buttons:
- Read: This button will read the current settings from your radio and display them on the software window. You can use this option if you want to modify the existing settings of your radio or backup them in a file. - New: This button will create a new file with default settings and display them on the software window. You can use this option if you want to start from scratch or reset your radio to factory settings. Once you have read the current settings from your radio or created a new file, you can edit the memory channels, menu settings, and other options on the software window. You can use the tabs, buttons, menus, and fields to change the values and parameters according to your needs. You can also use the "Help" menu to access the user manual of the software for more details and instructions.
After editing the settings, you need to write the new settings to your radio or save them in a file. You can do this by clicking on one of these buttons:
- Write: This button will write the new settings to your radio and overwrite the previous ones. You should see a progress bar and a message that says "Write OK" when the process is completed. - Save: This button will save the new settings in a file on your computer. You can choose any location and name for the file, but make sure to keep the ".dat" extension. You can use this option if you want to keep a copy of your settings or transfer them to another radio. Conclusion
Congratulations! You have successfully downloaded and installed software for your Abbree AR-889G radio. By using this software, you can program your radio easily and customize it according to your preferences. You can also enjoy the various features and functions of your radio more.
Here are some tips and suggestions for using the software and the radio:
- Before downloading and installing the software, make sure that your computer meets the minimum requirements, such as operating system, memory, disk space, etc. - Before connecting your radio to your computer, make sure that your radio is fully charged or connected to a power source. - Before writing new settings to your radio, make sure that you have read the current settings from your radio or created a backup file. - After writing new settings to your radio, make sure that you turn off and on your radio to activate the changes. - If you encounter any problems or errors while using the software or the radio, you can refer to the user manual of the software or the radio for troubleshooting tips. You can also contact Abbree Electronic Co.,Ltd. for technical support or warranty service. We hope that this article has been helpful and informative for you. If you have any feedback or questions, please feel free to share them with us in the comments section below. We would love to hear from you and help you with any issues.
FAQs
Q1: What is the difference between Abbree AR-889G and Zastone ZT-889G radios?
A1: Abbree AR-889G and Zastone ZT-889G radios are very similar in terms of appearance, features, and functions. They are both tri-band transceivers that cover VHF, UHF, and 350 MHz bands. They both have a built-in GPS function, a cross-band repeater function, a dual display, a night mode, a backlight mode, a duplex working mode, a dual receive mode, 999 memory channels, CTSS/DCS, VOX, DTMF, SOS, priority scan, remote emergency alarm, wide/narrow bandwidth selection, operating voice prompts in English and Chinese, single tone pulse frequency, reverse frequency, stopwatch function, and many more features. However, there are some minor differences between them, such as the brand name, the logo, the color, the firmware version, the software compatibility, and the customer service. You can choose either one of them according to your preference and availability.
Q2: How can I update the firmware of my Abbree AR-889G radio?
A2: The firmware of your Abbree AR-889G radio is the program that controls the operation and functionality of your radio. Sometimes, Abbree Electronic Co.,Ltd. may release new versions of the firmware to fix bugs, improve performance, or add new features. To update the firmware of your radio, you need to download the latest firmware file from their [download page] and then use a special tool called "Firmware Upgrade Tool" to flash the firmware to your radio. The Firmware Upgrade Tool is also included in the software file that you downloaded in step 1. To update the firmware of your radio, you can follow these steps:
- Unzip the software file that you downloaded in step 1 and then run the file named "Firmware Upgrade Tool.exe". This will open the Firmware Upgrade Tool window on your computer. - On the Firmware Upgrade Tool window, click on the "Open" button and then select the firmware file that you downloaded from their download page. The firmware file should have a ".bin" extension. - Connect your radio to your computer using a USB cable as described in step 2. Make sure that your radio is turned on and set to programming mode. - On the Firmware Upgrade Tool window, click on the "Upgrade" button and then wait for the process to complete. You should see a progress bar and a message that says "Upgrade OK" when the process is completed. - Turn off and on your radio to activate the new firmware. Q3: How can I use the GPS function of my Abbree AR-889G radio?
A3: The GPS function of your Abbree AR-889G radio allows you to receive and transmit your location information. You can use this function to navigate, track, or share your location with others. To use the GPS function of your radio, you need to do the following:
- Turn on your radio and then press and hold the "GPS" button for about 3 seconds until you see "GPS ON" on the screen. This means that your radio is ready to receive GPS signals. - Wait for a few minutes until you see a satellite icon on the screen. This means that your radio has acquired GPS signals and determined your location. - Press the "GPS" button once to see your latitude and longitude coordinates on the screen. You can also press the "MENU" button to access other GPS options, such as altitude, speed, direction, distance, etc. - To transmit your location information to others, you need to set up a memory channel with GPS function enabled. You can do this by using the software or by using the menu settings on your radio. You need to select a memory channel and then enable the "GPS TX" option. You also need to set up a frequency, a tone, a bandwidth, and other parameters according to your communication needs. - To receive location information from others, you need to tune in to a memory channel or a frequency that has GPS function enabled. You also need to match the tone, bandwidth, and other parameters with the sender. You should see a GPS icon on the screen when you receive a GPS signal. You can press the "GPS" button once to see the latitude and longitude coordinates of the sender on the screen. You can also press the "MENU" button to access other GPS options, such as altitude, speed, direction, distance, etc. Q4: How can I use the cross-band repeater function of my Abbree AR-889G radio?
A4: The cross-band repeater function of your Abbree AR-889G radio allows you to use your radio as a relay station to extend the communication range of other radios. You can use this function to communicate with radios that are out of direct reach or in different frequency bands. To use the cross-band repeater function of your radio, you need to do the following:
- Turn on your radio and then press and hold the "BAND" button for about 3 seconds until you see "RPT ON" on the screen. This means that your radio is ready to work as a cross-band repeater. - Set up two memory channels on your radio: one for receiving and one for transmitting. You can do this by using the software or by using the menu settings on your radio. You need to select two memory channels and then set up their frequencies, tones, bandwidths, and other parameters according to your communication needs. You also need to enable the "RPT" option for both memory channels. - Press the "A/B" button to switch between the two memory channels. The channel that is displayed on the top of the screen is the receiving channel, and the channel that is displayed on the bottom of the screen is the transmitting channel. You can also use the "VFO/MR" button to switch between VFO mode and memory mode. - Place your radio in a suitable location that can receive and transmit signals from both sides of the communication. Make sure that your radio has enough battery power or is connected to a power source. - To communicate with other radios through your cross-band repeater, you need to tune in to the same frequency and tone as your receiving channel or your transmitting channel, depending on which direction you want to communicate. For example, if you want to communicate from VHF to UHF, you need to tune in to the same frequency and tone as your receiving channel on VHF. If you want to communicate from UHF to VHF, you need to tune in to the same frequency and tone as your transmitting channel on UHF. Q5: How can I contact Abbree Electronic Co.,Ltd. for technical support or warranty service?
A5: If you have any questions or problems with your Abbree AR-889G radio or software, you can contact Abbree Electronic Co.,Ltd. for technical support or warranty service. You can use one of these methods:
- Email: You can send an email to [their email address] and describe your issue or inquiry in detail. You should also provide your name, contact information, product model, serial number, purchase date, and proof of purchase. - Phone: You can call [their phone number] and speak with their customer service representative. You should have your product model, serial number, purchase date, and proof of purchase ready when you call. - Website: You can visit [their website] and fill out an online form with your name, email address, phone number, product model, serial number, purchase date, proof of purchase, and message. You can also attach files or photos if needed. They will reply to you as soon as possible and provide you with solutions or instructions. 44f88ac181
Comments